Dash wiring pic.

[whitehillbilly64]

Morning from Aus.
I removed the dash panel from my 64 2a, to sort out the Ignition switch.
Now I cannot find the picture I took of the wiring, before I pulled the connections off 
I did a search, but nothing came up.
Where might I find a pic of the dash wiring?
Thanks.

whitehillbilly

[AlexB]

There is a diagram of the behind the dash wiring in the wiring section

I've not looked since the new forum but it was there on the old one

[Richard]

Those diagrams are here. I found another one in the Series 2 and 2a workshop manual, p. P8 for petrol, see the screenshot below. I have a picture of the rear of the dash panel, but I'm afraid it won't be of much help as the wires to and from the ignition switch do not have the correct colour corresponding to the diagram. It has al been rewired by a PO.
Richard

[Serious Series]

Any of these help.
https://series2club.co.uk/2023_new_forum/index.php?topic=2.0
Or the attached

[whitehillbilly64]

Thanks.
Looked through those and have printed copies.
Somewhere was an image of the dash panel, with coloured wires from the rear.
Maybe was on the old forum?

whitehillbilly

[Richard]

Maybe in the section on Technical pictures? Or this thread on LandyZone about the wiring harness of a Series 2, complete with colours. Or this picture of the rear of the ignition/lighting switch, also on LandyZone?
Richard

[whitehillbilly64]

Thanks Richard.
Found and read a couple of Landy Zone threads on 2a wiring an hr or so ago.
Looks to be helpful.

whitehillbilly

[AlexB]

there was definitely a diagram of the back of the clocks, Alan produced it at my behest, a few years ago. It's been very useful, esp if you are colour blind (as a few of us on here are)

[AlexB]

there we go
I hope it's what you meant !!
And if not, that it helps

[whitehillbilly64]

Thanks Alex.