Smiths flat heater location

[Bigdog]

Is this the correct location for a smiths flat heater, thinking of putting one in my 1970 series 2a 109 ex military as I believe it's the correct heater for that series, picture for attention, thanks

[109+1]

Looks correct to me.

[Birdsnest55]

Yes, there should be some holes in the bulkhead where the pipes go through.

Paul

[cswagon]

Sorry for the hi-jack but what are the correct fixings to hold it there please? There is a large gap at the bottom because of the shape of the bulkhead. Thank you. Graham.

[109+1]

If you look at the one I have for sale you can see the brackets that are fixed/welded to the heater.

[Davidss]

These heaters recirculate the air already in the cabin.
This air is drawn from behind the heater (the space between the fan blades and the bulkhead) so a space all round the box is needed so cabin air can flow towards the fan blades.

Regards.

[UXC1967]

This is mine, top bracket bolt to heater then to bulkhead, bottom bracket are welded to heater, and there are 4 rivnuts in dash.You cannot view this attachment.You cannot view this attachment.You cannot view this attachment.

[cswagon]

That is extremely helpful. Thank you very much. Graham.

[Leon]

Parts page attached.