What did you do with your Series 2 in July ...

[Wittsend]

New Forum, new month ... done anything interesting with your Land Rover today

[scotty38]

I put a new battery on mine on Monday so counts as this month.....

[Birdsnest55]

I have changed the 2 front dumb irons and fitted new shocks and springs.
Both sides are now the same length between the spring bush and front mounting holes.
Previously there was 1/2" difference.
Found that the near side dumb iron had been patched over some rather large ripples.

Paul

[roverscotty]

Received the block back from the machine shop getting it ready for paint again..

[Peter Holden]

Been to the tip again and had a bit of a ride round in my now quieter diesel, the serviced injectors have made a lot of difference

Peter

[Genocache]

Nope, going grocery shopping later this morning.

[Rustandoil]

I was going to fit a fuel filter, but it looks very poor quality.... Looks a mess with two short sections of pipe and 4 x jubilee clips 😕

[Tom]

Dragged my project out of the bushes last week, I put it there 3 years ago as a temporary measure, and then life got in the way.
Hopefully I'll now be able to crack on and make a little progress!

[Genocache]

Well, my trip to the grocery turned more exciting than I expected. 2 miles from town I started hearing a ticking noise. It slowly got louder and I deduced it was rotational in source. I finally figured it was the speedo cable by the time I got to the store. After shopping it started right away and continued at slower than 25mph speeds, above that no noise. By the time I got home It had turned into a squeek and I figured the bushing in the speedo needed lube.
    So after putting the groceries away I pulled the speedo and took it apart and cleaned and lubed the bushing. Then put it all back together. Testing with an old cable and drill I could hear no squeak.

[Paul4978]

Sorted out the wiring to the front lights - brittle looms after dismantling. Mainly trimming back and re- bulleting. New indicator and its loom. Bits from Embertons - quick delivery and club discount.
Road legal again so 7 miles for petrol and Maltesers. SS exhaust sounds different but no leaks

[gromet]

Mines stuck in the garage as the concrete out front is being replaced what should have been a 2 day job started on Monday has turned in to a week as the concrete  won't be here till this coming Monday and no matter what gromet is coming out Thursday morning so it better be set .

[Eskvalleyboy]

Freda took my mig welder to work to assist in the workshop rehash.

[Peter Holden]

Just another plain old tip run with garden rubbish

Peter

[Wittsend]

Been to the tip again and had a bit of a ride round in my now quieter diesel, the serviced injectors have made a lot of difference

Peter

You seem to be spending a lot of time at the tip - do you have a season ticket ?

[Crumbly65]

Picked up my S2 from my mechanic's workshop after he's fitted my new set of Jones Springs.

Wow - what a difference!  I had no idea how much my previous set had deteriorated over the last 20 or so years, despite my best efforts with a wire brush and motorcycle chain grease..........

I'm a happy bunny again.