What did you do with your Series 2 in July ...

[Peter Holden]

Our garden was left during the time that we were looking after mother in law and we are trying to get it back to some kind of order so lots of cutting down and digging up and it all has to go to the tip.  It is a good excuse to keep driving the land rover, every day if possible.

Peter

[g6anz]

It got a new MOT.
Two advisories: oil leaks (no surprises) and a sticky rear brake. This will be investigated ASAP

[Wittsend]

Oil leaks are good - means it's got oil in it 

[Hercules]

Frontend Friday Saturday for Hercules, literally; new wings, new bonnet, wheel carrier and wheel planted, steering relay fixed, windscreen panels resealed & we got an MOT !!
Big thanks to Diffwhine, Mike Rivett & Eddie for the introductions. Happy Land Rovering Everybody

[attach id=313]Hercules July23.jpeg

[Malcolm R]

Started fitting my custom wiring loom. Been a bit of a mess deciding where things will live. Now wondering if perhaps I've added too many extra features 

[Dopey]

Someone knocked on the door this afternoon, wanted to buy the Landy lol

[jkhackney]

I adjusted the exhaust valve clearances on the Dormobile yesterday after having replaced the camshaft in November 2021. I had left the clearances a bit bigger than .010 just to make sure the valves closed, but it was noisy. However I found the exhaust manifold nuts a bit loose and some soot was on the gasket, so maybe the noise was an exhaust leak ... anyway after cleaning the gasket and careful re-assembly it should all be quieter now.

[1949KC]

After dragging my vintage Rice Livestock trailer out of storage a few days ago, this morning, I helped my Son move some furniture to his new house.

[Alan Drover]

That would be a good photo for the competition.

[Eskvalleyboy]

Went for the Monday morning grind.

[RobS]

Started to fit my Heystee rear disc brake kit 

[cswagon]

Started fitting my custom wiring loom. Been a bit of a mess deciding where things will live. Now wondering if perhaps I've added too many extra features 

I intend to make my own loom on my latest project and just wondered what you were going to use to wrap yours where it is on show please.
Thank you.
Graham.

[Herald1360]

Drove round some soggy bits of Wales, then hooked it up to the Puck and drove home from Talybont on Usk via Abergavenny and Hereford.

[simon1959]

Fitted the old gnarly mudflaps tonight

[Paul4978]

Commuted to work in S2A 3 days this week. Smiling again