2 Land Rover mystery parts...... help

[island dormy]

  Hi Guys

  Does anybody have any idea where these parts would go?
I am sure they are landrover related, possibly off the 69 Nada?
  Thanks  Victor

[Craig T]

Is the top one an interior mirror mounting bracket?

Craig.

[andyjb]

Bottom one looks like part of an exhaust bracket.

[Talullah]

Could the bottom one be a horn bracket for the old Clearhooter horn.

[Larry S]

First pic is of the mirror mounts.  Kinda sorta looks like the one with the arrow, but I don't think it's that.

Second pic shows part B, bulkhead mount for brake lines.  I've been told I mounted the lines wrong, but it works for me.

[GHOBHW]

never seen that bulkhead mount/brake mount in my entire life, must be a north america thing?

[Larry S]

never seen that bulkhead mount/brake mount in my entire life, must be a north america thing?

No clue.  It was installed this way in mine when I got it. I was told the lines go on the other side though.  However - there was nothing attached to that bracket back then other than a yoke shaped clamp.  When I first got Grover the brake lines didn't follow the pattern in the manual.

[Genocache]

Pretty sure Larry is correct; A is the mirror mount, the large holes go under the windscreen at the 2 center bolts with the 2 small hole pointed to the rear and down. B is the brake line bracket.

[island dormy]

  Hi

  A is the mirror mount for the 69 for sure, thanks. I checked some photos of when I first got the rover 6 years ago and can just make it out.
The 62 does not have that bracket the mirror gets screwed directly to the windscreen frame.
 

  B ?? I do not think its the horn mount I think those are kind of triangle shaped?
          Maybe part of a muffler clamp?
          Maybe a brake line bracket?
          Maybe a fuel line bracket I kind of  maybe remember something like that near the frame near the left side footwell
          possibly holding the fuel line to the body?

  Keep your guesses coming.

  Victor
               

[Larry S]

Here are a couple of the 'before' pics I took of Grover almost 20 years ago, before phone cameras were as good as they are now.  So apologies for the blurriness. I do have better pics somewhere though.

What you really can't see in the pic is the old line remnants still attached to the backside.  A previous owner cut the lines and left the little nubs attached and then rerouted new lines.

Perhaps it's a NA/US thing.  I haven't checked my early '60s parts book to check yet.

Cheers!
Larry

[island dormy]

Hi Larry

 Thanks maybe some rovers mounted the brake lines like that but I dont think that's it for mine.
Both of mine have the brake and clutch lines secured to the  firewall with small clamps.

  Victor

[island dormy]

Hi Guys

  Larry was correct about the brake line bracket. I was at a friends place yesterday he is replacing the engine and the bracket holding the brake lines was right there. His is a 1959.

 I have no clue where I got this bracket from but its a left over part now, maybe it came with the box of spares when I got the Nada 5 years ago? The brake master had been replaced before I got it along with the line to the brake booster mounted down by the battery tray.

  Victor

[Gareth]

Part B looks like it could be the centre rope cleat from a drop down tailgate. Someone maybe drilled a hole in it?