Tub support struts

[s2c-08616]

Anyone have any decent tub supports for my 2A swb, or suggest where to source them?

[Tom]

SP are currently the cheapest:
https://www.sp-4x4.com/rear_tub_crossmember_galvanised_AFC710010GALV_p/afc710010galv.htm

Next is YRM
https://yrmit.co.uk/product/hdg-rear-tub-under-floor-reinforcement-support-crossmember-lr-defender-series-2-3/

Then Emberton Imperial (Although these may work out cheaper with a club discount which is 5%).
https://embertonimperial.com/products/land-rover-series-2-2a-3-defender-lightweight-galvanised-support-rail-afc710010?_pos=26&_fid=47697a6dc&_ss=c

Bear in mind, if going for originality, YRM do this type, slightly more expensive, but dont have the cut outs at the end for forward facing seats (defender 07 onwards) - of course you can't really tell when fitted so it's up to you.
https://yrmit.co.uk/product/hdg-rear-tub-under-floor-reinforcement-support-crossmember-lr-defender-series-2-3-3/

I had my original set blasted and regalvanised. Thankfully they were OK when blasted and good enough to go again.

[Gres]

Paddocks have galvanised at £42 each, not including the club discount.

[Tom]

Even better - good find Gres.

[Mycroft]

I went with YRM earlier this week. Not going to need the seatbelt brace bit, so just got the cheaper ones.