Non servo clutch cylinder

[Bigdog]

Are the brake and clutch non servo cylinders the same as they look identical, for a 1970 series 2a 109 , thanks

[Wittsend]

You'll find this table useful ...

Look in the parts manual to confirm the actual pn: you should have fitted.

 

[Bigdog]

Thanks but it's not allowing me to open it

[Smokey 11a]

You could compare the part numbers on a selling site like Paddocks.

https://www.paddockspares.com/parts-and-accessories/land-rover-series-2-and-3.html

[BradfordS2]

On an 88" they are the same. But the 109" brake master cylinder is a larger bore.

[Bigdog]

It's just that I had forgotten I got the brake one ages ago and didn't realise I had bought 2 off them

[Wittsend]

Don't know why you can't see my original table of parts - try this one 

[diffwhine]

Thanks but it's not allowing me to open it

It wouldn't let me open it either at first attempt. Windows error - not able to open it in protected mode. I tried a few more times and now it works fine. There must be a windows setting which enables you to open downloads or mail attachments without protected mode, but can't see it. Makes obvious sense to have that function though.

[Serious Series]

Clicking on the original post from Wittsend xls file loads the file to my laptop in down load folder.

[Genocache]

Because Wittsend's file is a Microsoft file it is protected and wants me to sign in to Microsoft, I don't want to.

[Birdsnest55]

You need XL to read it or Open docs

Paul

[Serious Series]

This is what I use open office all free and the drawing package is good too.

https://www.openoffice.org/download/