Hi Folks.

Returned after a few years of doing other projects.

Still have OYF and NTC for those of old.

OYF is a bit worse for wear after a few years and many thousands of miles after the rebuild. Its due a birthday once NTC is done.

NTC is still fairly well progressed, but I've been embarrassingly distacted rebuilding my 110 and a few narrow gauge railway locos, buying a house and putting a railway in     

Im also doing a project with a sucessful bulkhead and tub manufacturer (no real affiliation other than a friend) so may be seeking a poll post to the market demand for generic or specific bulkheads... my preference being specific. 

All the best,

Adam.

Welcome back.
I have a part made Loco I must advertise and sell soon.
Any ideas where the best place to advertise would be?

Paul

Thanks Paul. What size or scale? Most of my stuff is 2ft gauge ex industrial equipment. But I have friends in most areas if the hobby.

Cheers

Adam

Hi Adam these are much smaller 3 1/2" between the rails.

Loads of other wheels and bits.

Paul

Hi Paul. Looks like a Martin Evans-Jubilee design.

Marketplace on faceache if you're on there is good to start. Or Ebay.

Traders are Station Road Steam and The Steam Workshop.

Cheers

Adam

Looks like it has a copper boiler that is presumably complete as well. That has to be worth a few quid.

I have a 1/4" scale Burrell traction engine but the steel boiler is trashed, rusted too thin in many places. A new copper boiler was £7k and a 2 year waiting list for one so it's now just a large pile of bits in the corner of my garage.
I did play with the idea of making my own steel boiler replacement but apparently you need to be a coded welder of pressure vessels to stick it all together.

Craig.

Quote from: Birdsnest55 on Sep 30, 2024, 03:03 PMHi Adam these are much smaller 3 1/2" between the rails.

Loads of other wheels and bits.

Paul

I would try your local "Model Engineers" club. Maybe https://www.rugbymes.co.uk/

Quote from: Andrew on Sep 30, 2024, 03:54 PM

Quote from: Birdsnest55 on Sep 30, 2024, 03:03 PMHi Adam these are much smaller 3 1/2" between the rails.

Loads of other wheels and bits.

Paul

I would try your local "Model Engineers" club. Maybe https://www.rugbymes.co.uk/

I had a chat with them a while back, they are more about running engines than building them.

I will have to try again.

Thanks Paul

Quote from: Craig T on Sep 30, 2024, 03:50 PMLooks like it has a copper boiler that is presumably complete as well. That has to be worth a few quid.


Craig.

The boiler is all there but needs assembly. Scrap I could make a few quid. All boilers have to be tested, this was made before some of the rules applied I am guessing early 80's

Paul

Yup, there was a time when you could build your own boiler and as long as it passed a pressure test, good to go.

Speaking with the boiler tester that condemned my steel boiler you now need to provide certificates for the material used, it has to be welded together by a coded welder and once he his happy that is done, he will perform a 2x hydraulic pressure test then come back for a steam test when the engine is all back together.
Copper boilers are off course silver soldered together which is an art in itself and getting the whole thing hot enough to solder requires some pretty serious kit. TIG welding of copper is acceptable but again, guess a coded welder needs to do it.

Off course a steam boiler is a dangerous thing so no harm in having a few rules and regulations with them.

I'd go for ebay or Facebook market place to sell it.

Craig.

Quote from: Birdsnest55 on Sep 30, 2024, 03:57 PM

Quote from: Andrew on Sep 30, 2024, 03:54 PM

Quote from: Birdsnest55 on Sep 30, 2024, 03:03 PMHi Adam these are much smaller 3 1/2" between the rails.

Loads of other wheels and bits.

Paul

I would try your local "Model Engineers" club. Maybe https://www.rugbymes.co.uk/

I had a chat with them a while back, they are more about running engines than building them.

I will have to try again.

Thanks Paul

Ask for Ed Parrot of ME laser. A personal friend and top chap. A VERY acomplished builder.

Here is OYF shunting my 1938 Lister Railtruck. Should anyone have a nice J.A.P 980cc V twin. The Lister would love to hear from you. Keeps the series in work 😊

An interesting thread. 

Makes it worth logging in.

Such a change from those who only come on here to ask questions (and often fail to say thank you, when they're answered. )

Thanks Exile. I still remember a bit from the older forum, about 10 years ago so should be able to help a few out if needed.

Excuse ignorance, but I'm a newcomer to things Land Rover. Until recently I never pictured a Venn diagram of Land Rover and railways and traction engines, but I see the connection. A bit late for me to go down that path, but interesting nevertheless. (:
I saw OYF and NTC and thought "oh oh, more abbreviations", then I saw the photo. D'oh